Accuphase Monophonic Power Amplifier M-60 (Pair)
Accuphase Monophonic Power Amplifier M-60 (Pair)
Accuphase Monophonic Power Amplifier M-60 (Pair)
  • Load image into Gallery viewer, Accuphase Monophonic Power Amplifier M-60 (Pair)
  • Load image into Gallery viewer, Accuphase Monophonic Power Amplifier M-60 (Pair)
  • Load image into Gallery viewer, Accuphase Monophonic Power Amplifier M-60 (Pair)

Accuphase Monophonic Power Amplifier M-60 (Pair)

Accuphase Laboratory, Inc. (known initially as Kensonic Laboratory, Inc.) is a Japanese, Yokohama-based high-end audio equipment manufacturer founded by former Kenwood engineer Jiro Kasuga in late 1972.

Use the Accuphase c-200S Stereo Control Center as a preamp to work with the Accuphase Monophonic Power Amplifier M-60. Here at Audio Image we also have the Accuphase Accuphase P-300S Stereo Power Amplifier pre-owned for demo.

Form Monophonic power amplifier
Output power
(20Hz – 20kHz, 0.03% distortion)
450W (4 Ohms)
300W (8 Ohms)
150W (16 Ohms)
THD (20Hz – 20kHz) 0.03% or less (at max power)
0.01% or less (at -3dB output)
0.05% or less (at 50mW output)
IM distortion 0.01% or less (at Output power)
Frequency response 20Hz-20kHz, +0 / -0.2dB (at max power)
2Hz-150kHz, +0 / -3.0dB (at 1W output)
Damping factor (8 Ohm load) 120(40Hz)
Input sensitivity/impedance 2.0V/100 kOhm
S/N ratio (IHF-A) 115dB (at Output power)
Subsonic Filter 17Hz, 18 dB/oct
Power output meter Logarithm compression type
The semiconductor used Transistor: 47 pieces
IC: Three pieces
Diode: 51 pieces
Power supply voltage 100V/117V/220V/240V, 50Hz/60Hz
Power consumption At idle: 65W
Into 4 Ohms, max output power: 800W
Into an 8 Ohms, max output power: 540W
Dimensions Width 482 x height 170 x depth 345mm
Weight 27kg